Konica Minolta bizhub C451 - Manual (Page 303)

Network Settings 4
C451 4-58
4
To use SMB, touch [ON], and then specify the desired settings.
5
Touch [OK].
6
Touch [Close].
– To cancel changes to the settings, touch the menu item name in the
Bookmark screen to return to the selected screen without applying
the changes to the settings.
Print Setting
Select whether or not the SMB port is used in Print mode. Settings can be
specified for the following.
1
Touch [5 Network Setting] in the Administrator Settings screen.
– For details on displaying the Administrator Settings screen, refer to
“Displaying the Administrator Settings screen” on page 3-7.
2
Touch [5 SMB Settings] in the Network Settings screen.
Parameter Description
NetBIOS Name Specify the NetBIOS name with uppercase letters. Use the keyboard that
appears in the touch panel to type in the NetBIOS name (15 characters
or less).
Print Service Name Specify the print service name with uppercase letters. Use the keyboard
that appears in the touch panel to type in the print service name (12 char-
acters or less).
Workgroup Specify the workgroup with uppercase letters. Use the keyboard that ap-
pears in the touch panel to type in the workgroup (15 characters or less).