Ipsec sa settings (ipsec settings), Ipsec sa settings (ipsec settings) -34 – Konica Minolta bizhub C451 User Manual
Page 279
Network Settings
4
C451
4-34
IPsec SA Settings (IPsec Settings)
A maximum of eight combinations of security protocols and algorithms for
IPsec communication can be stored. Settings can be specified for the follow-
ing.
0 In order to apply the IPsec settings, settings must be specified for “IKE
Settings”, “IPsec SA Settings” and “Peer”.
1
Touch [IPsec Settings] in the TCP/IP Settings screen.
2
To specify settings, touch [ON], and then touch [IPsec SA Settings].
The IPsec SA Settings screen appears.
Parameter
Description
Lifetime After Estab-
lishing SA
Specify the length of time that the key is valid after being generated when
creating communication tunnels.
Security Protocol
Select the security protocol.
ESP Encryption Al-
gorithm
If “Security Protocol” was set to “ESP”, specify the ESP encryption algo-
rithm.
ESP Authentication
Algorithm
If “Security Protocol” was set to “ESP”, specify the ESP authentication
algorithm.
AH Authentication
Algorithm
If “Security Protocol” was set to “AH”, specify the AH authentication al-
gorithm.