Konica Minolta bizhub C451 - Manual (Page 196)

Specifying Utility mode parameters 3
C451 3-30
16
Touch [ ↑] or [↓].
New screen 3/3 appears.
17
If necessary, specify settings for, “Proxy”, “SSL Settings” and “Port
Number”.
– To enter a port number, press the [C] (clear) key to clear the current
value, and then use the keypad to type in the port number.
– If a value outside the allowable range is specified, the message “In-
put error” appears. Type a value within the allowable range.
18
Touch [Index], and then select the index characters.
19
Touch [OK].