Konica Minolta bizhub C451 - Manual (Page 223)

Specifying Utility mode parameters 3
C451 3-57
3.9 Reset Data After Job
Select whether or not the settings, such as the scanning settings specified
during a transmission, are canceled after the transmission is completed. The
following settings can be selected.
1
Touch [1 System Settings] in the Administrator Settings screen.
– For details on displaying the Administrator Settings screen, refer to
“Displaying the Administrator Settings screen” on page 3-7.
2
Touch [9 Reset Settings].
3
Touch [3 Job Reset].
4
Touch [Next Job].
5
Touch [Reset Data After Job].
Setting Description
Reset All All parameters are returned to their default settings.
Reset Destina-
tion Only Cancel only the destination settings.
Confirm with
User A confirmation message appears, asking whether or not to cancel the set-
tings.