Using ntlm v1 and ntlm v2, Using ntlm v1 and ntlm v2 -10 – Konica Minolta bizhub C451 User Manual

Page 255

Network Settings

C451

4-10

Using NTLM v1 and NTLM v2

Before performing the operation, make sure that the following information is
available.
-

Administrator password (required)

Default domain name (required)

List of users for authentication (required)

Detail

Do not use “”” or “+” in the external server password. For details on the
operating conditions of the external server, contact the network adminis-
trator.

If “Password Rules” is set to “Enable”, only a password with 8 digits can
be specified. For details on the password rules, refer to the User’s Guide
[Copy Operations].

Note

NTLMv2 is applied from Windows NT 4.0 (Service Pack 4).

Display the Administrator Settings screen.

–

For details on displaying the Administrator Settings screen, refer to
“Displaying the Administrator Settings screen” on page 3-7.

Touch [Administrator Settings], then [User Authentication/Account
Track], then [External Server Settings], and then specify settings for the
following.

–

Specify the server name.

–

Select “NTLM v1” or “NTLM v2” as the server type.