Konica Minolta bizhub C451 - Manual (Page 285)

Network Settings 4
C451 4-40
4
To use IPX settings, touch [ON], and then specify the desired settings.
5
Touch [Close], and then touch [Close] in the next screen that appears.
– To cancel changes to the settings, touch the menu item name in the
Bookmark screen to return to the selected screen without applying
the changes to the settings.
NetWare Print Settings
NetWare print settings can be specified and the status can be checked. Set-
tings can be specified for the following.
If “PServer” was selected as the NetWare print mode, specify settings for the
following.
Parameter Description
NetWare Print Mode Select PServer or Nprinter/Rprinter as the print mode to be used.
Status The NetWare status can be checked.
Parameter Description
Print Server Name Specify the print server name. Use the keyboard that appears in the
touch panel to type in the server name (63 characters or less).
Print Server Pass-
word Specify the password required when the print server logs on to the file
server. Use the keyboard that appears in the touch panel to type in the
password (63 characters or less).
Polling Interval Specify the interval for searching the print queue. (Range: 1 to 65535)
NDS/Bindery Set-
ting If “NDS” is selected, bindery is disabled. If “NDS & Bindery” is selected,
both NDS and bindery are enabled.
File Server Name Specify the name of the file server where the print server logs on. Use the
keyboard that appears in the touch panel to type in the server name (47
characters or less).
NDS Context Name Specify the NDS context name. Use the keyboard that appears in the
touch panel to type in the NDS context name (191 characters or less).