Konica Minolta bizhub C451 - Manual (Page 173)

Specifying Utility mode parameters 3
C451 3-7
The User Settings screen appears.
2
Note
To finish specifying settings in the Utility mode, press the [Utility/Counter]
key. Otherwise, exit the Utility mode by touching [Close] in each screen
until the screen for the Copy, Fax/Scan or Box mode appears.
If user authentication settings have been specified, [Change Password],
[Change E-Mail Address] and [Change Icon] are available when a regis-
tered user is logged on.
Displaying the Administrator Settings screen
1
Press the [Utility/Coun-
ter] key.