Konica Minolta bizhub C451 - Manual (Page 272)

Network Settings 4
C451 4-27
IP Filtering (Permit Access)
Specify the range of IP addresses permitted access.
2
Note
0.0.0.0 cannot be included in a specified range. For example, to specify
the range of addresses before 192.168.1.20, specify the range from
“0.0.0.1” to “192.168.1.20”.
A maximum of five ranges of permitted IP addresses can be specified.
1
Touch [IP Filtering (Permit Access)] in the TCP/IP Settings screen.
2
To specify permitted access, touch [Enable].
Specify the range of IP addresses permitted access.
3
Select a range, and then type in the IP addresses.
– Use the keypad to type in the address.
– To correct the entered numbers, touch [ ←] or [→] to move the cur-
sor to the character to be changed, touch [Delete], and then type in
the desired number.