Konica Minolta bizhub C451 - Manual (Page 69)

Scanning 2
C451 2-30
6
Touch [Name], and then use the control panel keypad and the key-
board that appears in the touch panel to type in the name of the pro-
gram.
– The program name can contain a maximum of 24 characters.
– To stop registering the program, press the [Reset] key or the [Mode
Memory] key.
– For details on typing in text, refer to “Entering text” on page 6-4.
7
Touch [OK].
8
Touch [Address], and then select the destination.
– When selecting destinations registered in the address book, desti-
nations can be selected from each destination type.
– Destinations can be specified either by selecting destinations reg-
istered in the address book or by typing them in directly.
– Destinations that cannot be specified, such as fax destinations, are
not displayed.