Konica Minolta bizhub C451 - Manual (Page 239)

Specifying Utility mode parameters 3
C451 3-73
3.12 Open API Settings
Select whether or not the interface is open to software with a function for
communicating with the machine. The settings for “Access Setting”, “Port
Number”, “SSL” and “Authentication” for Open API can be changed.
2
Note
If authentication is performed with PageScope Authentication Manager,
specify the SSL/TLS settings, and then enable the “SSL” of the TCP
Socket and OpenAPI settings.
For details on the TCP Socket settings, refer to “TCP Socket Settings” on
page 4-108.
Access Setting
Select whether or not to permit access from other systems that use Open
API. (The default setting is “Allow”.)
1
Touch [System Connection] in the Administrator Settings screen.
– For details on displaying the Administrator Settings screen, refer to
“Displaying the Administrator Settings screen” on page 3-7.
2
Touch [1 Open API Settings] in the System Connection screen.
3
Touch [Access Setting] in the Open API Settings screen.
Buttons for the available settings appear.
4
Touch the button for the desired setting.
– To permit access using Open API, touch [Allow].
– To prohibit access using Open API, touch [Restrict].