Konica Minolta Fujitsu Scanner - Manual (Page 60)

40
2.12 Feeding Documents Manually
7. Repeat the procedure 6 until all the documents are scanned.
⇒ After a certain time period of inactivity, the scanner will automatically recognize it as “no
document” and stop scanning.
8. To deactivate the “Manual Feed Mode” (Continuous Feed), press down
the Hopper Height Button ( ) on the Operator Panel for more than 3
seconds.
HINT
For setting the timeout for feeding the document manually, refer to section
“8.17 Timeout for Manual Feeding” on page 193 .