Konica Minolta Fujitsu Scanner - Manual (Page 220)

200
9.4 Other Options
The memory listed below is recommended. Two modules of the same specification must be installed at the
same time.
The memory modules are not provided with the scanner.
Memory type: 144-pin Unbuffered DODIMM
Manufacturer Model Size
Micron Technology MT8LSDT3264HY-133D2 256MB
ATTENTION
The scanner may not function properly if two modules of different types
are installed at the same time.
HINT
You can confirm whether the memory modules are installed properly or not
through the [Software Operation Panel]:
Click the [Device Setting] tab and check the value of scanner memory under
“Standard Information”.