Scanner specifica t ions – Konica Minolta Fujitsu Scanner User Manual
Page 223
203
10.1 Basic Product Specifications
10
SCANNER SPECIFICA
T
IONS
(*1)
For details, refer to
"7.2 Document Quality" on page 153
.
(*2)
The scanning speed is the maximum speed of the scanner hardware. The actual speed
may be slower due to the system overhead such as data transfer time.
(*3)
With JPEG compression enabled
(*4)
The maximum capacity varies depending on the document thickness. Refer to
mum Document Loading Capacity" on page 156
(*5)
The SCSI and USB interface cannot be used together.
(*6)
When using USB 2.0, you have to use a port compatible to USB 2.0. When connecting to
USB 1.1, the scanning speed will decrease.
(*7)
Avoid connecting other SCSI devices to the same bus. It can reduce the scanner through-
put.
(*8)
You can imprint alphabetic characters and number on the scanned document.
The fi-590PRF (pre-imprinter) will print prior to scanning on the front side of the document.
The fi-590PRB (post-imprinter) will print after the scanning on the back side of the docu-
ment.
You can install both the fi-590PRF and fi-590PRB, but you cannot use them at the same
time.