Konica Minolta Fujitsu Scanner - Manual (Page 196)

176
8.4 Multifeed Detection
When [Check overlapping] is selected as the detection method, you can also specify the detection area.
1. Start up the Software Operation Panel.
Refer to “8.1 Scanner Settings” on page 166 .
2. Select the “Document check area specification for Multifeed Detection”
setting on the [Device Setting 2] tab.
ATTENTION
• When scanning documents of different length together in the same
stack, select [Checking overlapping] .
• If something is glued to the documents (stamps, memo or photos), they
will be recognized as Multifeed when using [Checking overlapping] .
When scanning such documents, use [Checking length difference]
instead.
However, when using the [detection area/none-detection area] function,
you can also use [Checking overlapping]
.
• The setting can be done as well on the scanner driver configuration win-
dow.
(In this case, the scanner driver selection will have priority)