7 setting up the stacker, The stacker will be fixed in a horizontal position – Konica Minolta Fujitsu Scanner User Manual

Page 46

2.7 Setting up the Stacker

⇒ The stacker will be fixed in a horizontal position.

HINT

• When set to the “bottom edge alignment” position, the stacker will auto-

matically adjust its height according to its load.

• When set to the “Bottom edge alignment” position, the stacker’s maximum

load will be 500 sheets.

ATTENTION

• On both sides walls of the stacker, photo sensors are installed to detect

document height on the stacker. Make sure these sensors are not
blocked.

• The stacker may move up or down when the scanner is in the ready sta-

tus up or when scanning starts. Do not touch the stacker or place any-
thing on it at those times.

Sen

d to

Pow

Thin

Photo sensors