Konica Minolta bizhub C200 User Manual
Page 84
C200
7-8
Print functions of the PCL/PS drivers for Windows
7
2
Note
The secure print and collate print functions are available only when the optional expanded memory unit
is installed.
The offset function is available only when the optional separator and expanded memory unit are
installed.
If the optional expanded memory unit is not installed when using the combination function, only one set
is printed even if multiple copies have been specified.
The paper size "12 × 18" is equivalent to 304.8 × 457.2 mm which is slightly larger than A3.
To print on paper sizes other than the standard sizes, be sure to set the custom paper sizes first. You
can register a non-standard size by selecting "Custom Size" from the paper size option or original size
option.
To print data of the size as large as the standard size, by selecting "W" for each standard size paper for
"Original Size", the data can be centered and printed on papers larger than the original size.
For example, if you want to center and print 8-1/2 × 11 size data on 11 × 17 size paper, create data in
the size of "8-1/2 × 11W", and then specify "8-1/2 × 11W" for "Original Size" and specify "Paper Tray"
as the tray to be used with the printer driver.
On the machine side, load 11 × 17 size paper into the tray to be used, select the tray in [Basic screen
(Paper)], select [Change Settings] - [Wide Paper] on the control panel, specify "8-1/2 × 11W", and then
check that 11 × 17 size paper is displayed in "Select Size".
If the paper size is different than the sizes specified in "Select Size", specify the paper size by clicking
the [Change Size] button.
To print on a custom size, use the bypass tray, select [Change Settings] - [Wide Paper], select "8-1/2
× 11W", and then select the paper size to use from [Change Size].
Specify "Duplex Side 2" to print on the back side of a page.
!
Detail
For details on the paper size that can be loaded into the tray, refer to the User’s Guide [Copy
Operations].
For details on Output Method, refer to
"Function detail description" on page 10-2
.
Collate
ON/OFF
Specifies whether to print multiple copies by collating
them.
Offset
ON/OFF
When printing multiple copies, shifts the output posi-
tion of each set.
[Paper Settings for
Each Tray]
Paper Type Setting
Selects the paper tray to be specified.
The selectable items differ depending on the installed
options.
Paper Type
Selects the type of paper to be loaded onto the paper
tray.
Function name
Option
Description