Konica Minolta bizhub C200 - Manual (Page 43)

C200 4-11
Manual installation using the Add Printer wizard 4
4.2 Windows Vista/Server 2008
4.2.1 Network connection (LPR, Port9100, or SMB)
In Windows Vista/Server 2008, specify the port during the printer driver installation process.
Specifying the IP address setting for this machine
Specify the IP address of this machine.
!
Detail
For details on specifying the IP address of this machine, refer to the User’s Guide [Network
Administrator].
RAW port number setting for this machine
To use Port9100 printing, enable the RAW port setting in the TCP/IP Setting screen of this machine, and
specify the RAW port number (default setting is "9100").
!
Detail
For details port setting of this machine, refer to the User’s Guide [Network Administrator].
LPD setting for this machine
To use LPR printing, enable the LPD setting in the TCP/IP Setting screen of this machine.
!
Detail
For details on the LPD settings of this machine, refer to the User’s Guide [Network Administrator].
SMB setting for this machine
In "Print Setting" in the SMB Setting screen of this machine, specify the NetBIOS name, print service name,
and workgroup.
!
Detail
For details on the SMB settings of this machine, refer to the User’s Guide [Network Administrator].
Printer driver installation by searching printers using the Add Printer Wizard
2
Note
When installing on Windows Vista/Server 2008, administrator permissions are required.
Printers will be found during installation. Connect this machine to the network, and then turn on the
power.
1
Insert the printer driver CD-ROM into the CD-ROM drive of the computer.
2
Click the [Start] button, and then click "Control Panel".
3
From "Hardware and Sound", click "Printer".
– If Control Panel is displayed with Classic View, double-click "Printers".
The Printers window appears.
4
Click "Add a printer" from the toolbar.