Specifying the appletalk settings – Konica Minolta bizhub C200 User Manual
Page 65
C200
5-9
Installation on Macintosh computers
5
2
Note
If the Installable Options window appears, proceed to change the option settings as necessary. For
details, refer to
"Initializing the printer driver" on page 8-4
In Mac OS X 10.4, a printer can also be added by clicking the [Add] button on the Printer Setup Utility
dialog box.
5.1.3
Selecting and connecting the printer (OS X 10.2 and OS X 10.3)
In OS X 10.2/10.3, this machine can be connected with AppleTalk, LPR (LPD), or IPP.
After specifying the network setting for this machine, selecting this machine as the printer in Printer Setup
Utility or Print Center enables printing.
Specifying the AppleTalk settings
Specifying the AppleTalk settings for this machine
Enable AppleTalk in "AppleTalk Setting", and then enter the printer name.
!
Detail
For details on the AppleTalk settings of this machine, refer to the User’s Guide [Network Administrator].
Specifying the AppleTalk settings for the computer
Specify the AppleTalk settings for the Macintosh computer connected to this machine.
1
On the "Apple" menu, select "System Preferences".
2
Click the "Network" icon.
3
From "Show", select "Built-in Ethernet".
4
Click the AppleTalk tab, and then enable AppleTalk.
5
Click the close button at the top left of the dialog box.
–
When the "Apply configuration changes?" message appears, click the [Apply] button.
Adding a printer
1
Select "HDD" - "Applications" - "Utility" where the driver was installed, and then double-click "Printer
Setup Utility" or "Print Center" to open it.
2
When the Add Printer dialog box appears, click the [Add] button. When the printer list appears, click
the [Add] button.
–
If available printers have already been set up, the Add Printer dialog box does not appear.
3
Select "AppleTalk" for the connection method, and then select the zone to which this machine is
connected.
The connected printers are detected.
–
If the printer is not detected, turn off this machine, then on again.
When turning off the power, then on again, wait at least 10 seconds before turning it on again.
Otherwise, this machine may not function properly.
4
From the "Name" list, select the desired model name.
–
If the printer driver is automatically selected, skip to step 6.
–
If the printer driver is not selected, continue with step 5.