Konica Minolta bizhub C200 - Manual (Page 17)

C200 1-6
Overview of printer functions 1
1.2.2 Compatible interfaces
The following interfaces can be used to connect this printing system to a computer.
Ethernet interface
Select to use this printing system via a network connection.
Supports 10Base-T and 100Base-TX standards. In addition, the Ethernet interface supports the TCP/IP
(LDP/LPR, IPP, SMB), IPX/SPX (NetWare), and AppleTalk (EtherTalk) protocols.
USB interface
Select to use this printing system via a USB connection.
The USB interface can be connected to a computer running Windows. A USB cable is required for
connection. Use a type A (4 pin, male) or type B (4 pin, male) USB cable. A USB cable measuring three meters
or less is recommended.
Connection diagram
The printer cables are connected to each port on this machine.
Ethernet port (100Base-TX/10Base-T)
USB port
Machine (rear view)