Konica Minolta bizhub C200 - Manual (Page 51)

C200 4-19
Manual installation using the Add Printer wizard 4
4.3 Windows 2000
4.3.1 Network connection (LPR/Port9100)
When using the LPR/Port9100 printing, specify the port during the printer driver installation process.
IP address setting for this machine
Specify the IP address of this machine.
!
Detail
For details on specifying the IP address of this machine, refer to the User’s Guide [Network
Administrator].
RAW port number setting for this machine
To use Port9100 printing, enable the RAW port setting in the TCP/IP Setting screen of this machine, and
specify the RAW port number (default setting is "9100").
!
Detail
For details on specifying the RAW port number of this machine, refer to the User’s Guide [Network
Administrator].
LPD setting for this machine
To use LPR printing, enable the LPD setting in the TCP/IP Setting screen of this machine.
!
Detail
For details on the LPD settings of this machine, refer to the User’s Guide [Network Administrator].
Printer driver installation using the Add Printer Wizard
2
Reminder
When installing on Windows 2000, administrator permissions are required.
1
Insert the printer driver CD-ROM into the CD-ROM drive of the computer.
2
Click the [Start] button, point to "Settings", and then click "Printers".
3
Double-click "Add Printer".
The Add Printer Wizard starts.
4
Follow the on-screen instructions.
5
In the dialog box for specifying the connection method, select "Local printer", and then click the [Next]
button.