Konica Minolta bizhub C200 - Manual (Page 135)

C200 11-15
Settings on the control panel 11
11.2.13 Line/Page
You can specify the number of lines per page when printing text. (Default setting: Varies from area to area)
!
Detail
For details on displaying the User Settings screen, refer to "Displaying the User Settings screen" on
page 11-2 .
1
In the User Settings screen, touch [Printer Settings].
2
Touch [PCL Settings].
3
Touch [Line/Page].
4
Press the [C] (clear) key to erase the value, and then use the keypad to type in the number of lines. (5
lines to 128 lines)
– A value outside the range cannot be specified. Type in a value within the allowable range.
5
Touch [OK].
11.2.14 CR/LF Mapping
You can specify the CR/LF substitution method when printing text data. (Default setting: OFF)
[Mode 1]: Substitutes CR with CR-LF.
[Mode 2]: Substitutes LF with CR-LF.
[Mode 3]: Substitutes with CR-LF.
[OFF]: Does not perform substitution.
!
Detail
For details on displaying the User Settings screen, refer to "Displaying the User Settings screen" on
page 11-2 .
1
In the User Settings screen, touch [Printer Settings].
2
Touch [PCL Settings].