Konica Minolta Bizhub 215 - Manual (Page 89)

Printing on custom sized paper 4
4-12 bizhub 215
4.5
Us
in
g as
a
Pr
in
ter
Ch
apt
er
4
% When the size of the loaded paper is not registered, select [Edit Custom] (1) and register the paper
size specified in the main unit. Click [New] (2), enter the name in [Name] (3) and dimensions in [Di-
mensions] (4), then click [OK] (5). Select the registered paper size then click [OK] (6).
% In [Original Size] (7), select the custom sized paper that is registered.
% In [Paper Source], select [Bypass] (8).
% Check that [Paper Size] is set to the same size as the paper setting for the data to be printed.
4
Press [OK].
When using Tray 1
1
Load paper.
% If you are not sure about the size of the custom sized paper, measure the length (X) and width (Y)
using the Original Scale.
2
Configure the settings for the custom sized paper.
% Use +, to select the correct setting, then press OK. (1)(2)(3)(4)(7)(8)(9)
% Use the Keypad to enter the paper size, then press OK. (5)(6)
% If you are not sure about the size of the custom sized paper, measure the length (X) and width (Y)
using the Original Scale.
3
Select the printer and open [Preferences] (or [Properties]).
X Y