Konica Minolta Bizhub 215 - Manual (Page 42)

bizhub 215 1-37
1.16 Original Set 1
Int
ro
duc
ti
on
Chap
ter
1
1.16 Original Set
You can load originals into this machine by placing them sheet by sheet onto the Original Glass or by putting
multiple sheets into the ADF .
Loading the original onto the Original Glass
1
Open the ADF and load the original on it.
% Load the original with the side you want to copy facing down.
% Load the original along the Original Scales on the left and at the top of the Original Glass.
% When loading a transparent original (such as OHP transparencies) or a thin original (tracing paper),
place white paper on the original.
% For sizes of originals that can be loaded onto the Original Glass, refer to Chapter 3 of the [User's
Guide Copy Operations].
2
Gently close the ADF.
You can also load a book original onto the Original Glass.
For details on the procedure, refer to Chapter 3 of the [User's Guide Copy Operations].
Loading the original into the ADF
1
Open the Lateral Guide and load the original.
% Load the original with the side you want to copy facing up.
% Do not load more than 70 sheets into the ADF at a time, and do not load the sheets up to the point
where the top of the stack is higher than the , mark. Otherwise, a paper jam may occur or the orig-
inals or the machine may be damaged.
% For sizes of originals that can be loaded into the ADF, refer to Chapter 3 of the [User's Guide Copy
Operations].
2
Adjust the Lateral Guide to the original size.
% If the original is not loaded correctly, it may not be fed in straight.
% You can also load mixed originals into the ADF. For details on the procedure, refer to Chapter 3 of
the [User's Guide Copy Operations].