Konica Minolta Bizhub 215 - Manual (Page 104)

bizhub 215 5-5
5.1 Sending scanned data 5
Usi
ng
as
a S
c
a
nne
r
Cha
p
ter 5
6
Press Speed Dial. Enter a 3-digit dial number using the Keypad, then press OK.
% Before sending data to the server, register the FTP/SMB server address using a number between
[251 and 300] on the speed dial.
% The file format and compression coding method can be specified. For details, refer to Chapter 6 of
the [User's Guide Scan Operations].
7
Press Start.
% To interrupt the transmission, press Clear/Stop then select [YES] in the displayed screen. For de-
tails, refer to page 5-10.
% When you have loaded the original onto the Original Glass, go to Step 8.
8
Use +, to select [AUTO DETECTION] or [MANUAL], then press OK.
% When you select [MANUAL], you can specify the scanning size.
9
To start scanning, press OK.
10
When continuously scanning the original, load the next original, then press OK.
11
When scanning of all originals has been completed, press Start.
% To interrupt the transmission, press Clear/Stop and select [YES] in the displayed screen. For de-
tails, refer to page 5-10.