Konica Minolta Bizhub 215 - Manual (Page 53)

Option configuration 1
1-48 bizhub 215
1.20
Int
ro
duc
ti
on
Chap
ter
1
*
Indicates a built-in option that is not shown in the above figure.
8 Desk DK-707 This machine can be installed on this desk.
By using the desk, you can install this machine on the floor.
Up to three trays can be added on this desk.
This desk is hereinafter referred to as the Desk throughout
this manual.
9 Desk DK-708 This machine can be installed on this desk.
By using the desk, you can install this machine on the floor.
Up to four trays can be added to this desk.
This desk is hereinafter referred to as the Desk throughout
this manual.
10 Extended Operation Panel
MK-733 An address book registration number and address can be
registered or recalled while using fax and scanning functions.
11 Image Controller IC-209
*
This is a built-in printer controller that enables you to;
•
Use this machine as a PC printer (PCL or GDI); or
• Scan an original to send its data to a computer or send it
as an E-mail attachment.
For details, refer to [User's Guide Print Operations].
12 Network Card NC-504
*
This is a built-in network card that enables you to;
•
Use this machine as a network printer; or
• Send the scanned original as an E-mail attachment to a
computer.
For details, refer to the [User's Guide Network Administrator].
13 FAX Kit FK-510
* Allows this machine to function as a fax machine. Alternative-
ly, it allows more telephone lines to be connected.
14 Mechanical Counter MC-504
* Displays the total number of copied/printed sheets.
No. Name Description