Konica Minolta Bizhub 215 - Manual (Page 68)

bizhub 215 3-7
3.4 Registering frequently used fax destinations 3
Us
ing
as
a
F
a
x
Mac
h
in
e
Cha
p
ter 3
4
Enter the name and fax number of the destination using the Keypad, then press OK.
% For how to enter characters, refer to page 3-9.
% To configure the F-Code TX, baud rate, or transmission time setting, refer to Chapter 7 of the [User's
Guide Fax Operations].
Registering destinations in the speed dial
Register a destination in the speed dial; you can specify a destination easily and accurately without entering
a fax number using the Keypad.
1
Press Utility, and select [DIAL REGISTRATION].
% Use +, to select it, then press OK.
2
Select [SPEED DIAL].
% Use +, to select it, then press OK.
% For details on how to register destinations in the group dial, refer to Chapter 7 of the [User's Guide
Fax Operations].
3
Enter a desired 3-digit speed dial number using the Keypad, then press OK.
% Up to 250 stations (001 to 250) can be registered in the speed dial.
% When the LDAP setting has been configured, select [MANUAL SETTING].