Konica Minolta Bizhub 215 - Manual (Page 102)

bizhub 215 5-3
5.1 Sending scanned data 5
Usi
ng
as
a S
c
a
nne
r
Cha
p
ter 5
5
Specify the image quality.
% Use +, to select the correct setting, then press OK.
% Select [TEXT/PHOTO], [TEXT], or [PHOTO].
6
Enter the E-mail address using the Keypad, then press Start.
% The subject, CC address, file format, and compression coding method can be specified.
% One-touch Dial can be used to select the destination.
% The speed dial can be used to select the destination.
% The phone book can be used to select the destination.
% To interrupt the transmission, press Clear/Stop then select [YES] in the displayed screen. For de-
tails, refer to page 5-10.
% For details on each setting, refer to Chapter 5 of the [User's Guide Scan Operations].
% When you have loaded the original onto the Original Glass, go to Step 7.
7
Use +, to select [AUTO DETECTION] or [MANUAL], then press OK.
% When you select [MANUAL], you can specify the scanning size.
8
To start scanning, press OK.
9
When continuously scanning the original, load the next original, then press OK.
10
When scanning of all originals has been completed, press Start.
% To interrupt the transmission, press Clear/Stop and select [YES] in the displayed screen. For de-
tails, refer to page 5-10.