Konica Minolta Bizhub 215 - Manual (Page 63)

Sending a fax 3
3-2 bizhub 215
3.1
Us
ing
as
a
F
a
x
Mac
h
in
e
Cha
p
ter 3
3 Using as a Fax Machine
3.1 Sending a fax
This section explains how to send a fax.
This machine supports the G3 fax function. Its sending and receiving are applicable only to G3-base remote
machines.
1
Press Fax.
2
Load the original.
% For details on how to load the original, refer to page 1-37.
3
Specify the image quality.
% Use +, to select the correct setting, then press OK.
% When sending a photo original, select [STD/PHOTO], [FINE/PHOTO], or [S-FINE/PHOTO].
% If [S-FINE/TEXT] or [S-FINE/PHOTO] is selected, the original may not be sent as specified. In this
case, the original is sent with [FINE/TEXT] or [STD/PHOTO].
% When [FINE/PHOTO] or [S-FINE/PHOTO] is specified, if the original size is larger than the paper size
of the destination, the image quality may be degraded depending on the performance of the desti-
nation fax machine.
4
Specify the density.
% Use *) to specify the appropriate density, then press OK.
5
Enter a fax number using the Keypad, then press Start.
% In the Address Book, you can find numbers registered in One-touch Dial or the speed dial.
% When the desired number is registered in One-touch Dial, select the destination from One-touch Di-
al.
% To specify a number registered in the speed dial, press Speed Dial then specify the speed dial
number using the Keypad.
% To interrupt the transmission, press Clear/Stop and select [YES] in the displayed screen. For de-
tails, refer to page 3-10.
% When you have loaded the original onto the Original Glass, go to Step 6.