Konica Minolta bizhub C25 - Manual (Page 313)

Dual In-Line Memory Module (DIMM) 11-4
Dual In-Line Memory Module (DIMM)
d
You may need additional memory (DIMM) for complex graphics and
for duplex (double-sided) printing.
d
This machine detects only half of the amount of the installed memory.
Dual in-line memory module (or DIMM) is compact circuit board with
surface-mount memory chips.
There is 384 MB (Printer: 256 MB, Copier: 128 MB) of onboard mem-
ory and one available memory expansion slot. The memory can be
expanded to a maximum of 896 MB (384 MB + 512MB).
Installing a DIMM
Note
It’s very important to protect the printer controller board and any
associated circuit boards from electrostatic damage. Before performing
this procedure, review the antistatic caution on page 11-3. In addition,
always handle circuit boards by the edges only.
1
Turn off the machine and dis-
connect the power cord and
interface cables.