Konica Minolta bizhub C25 - Manual (Page 200)

Scanning With the Machine 7-21
Deleting From the Favorite List
Registered information can be deleted from the favorite list.
d
Changes made with this procedure will not be applied to the original
data (speed dial destination, group dial destination, etc.).
1
In the main screen (Scan mode), press the + or , key to select [UTILITY],
and then press the Select key.
2
Press the + or , key to select [DIAL REGISTER], and then press the
Select key.
3
Press the + or , key to select [FAVORITE], and then press the Select
key.
4
Press the + or , key to select [CHECK/EDIT], and then press the Select
key.
5
Press the + or , key to select the address to be deleted from the favorite
list, and then press the Stop/Reset key.
6
Press the + or , key to select [YES], and then press the Select key.
The selected address is deleted.
7
To delete another address, repeat the procedure from step 5.
8
To finish deleting addresses, press the Back key.
9
Press the + or , key to select [FINISH], and then press the Select key.
Registering Speed Dial Destinations (Direct Input)
E-mail addresses can be registered as speed dial destinations. A maximum
of 250 speed dial destinations can be registered.
d
Machine key operations cannot be used to register an FTP address or
SMB address as a speed dial destination. These addresses can be
registered with Local Setup Utility (LSU) or PageScope Web
Connection. For details, refer to the [Reference Guide] on the Docu-
mentation CD/DVD.
d
Speed dial destination numbers 221 to 250 are reserved for register-
ing FTP addresses and SMB address from Local Setup Utility (LSU) or
PageScope Web Connection.
1
In the main screen (Scan mode), press the + or , key to select [UTILITY],
and then press the Select key.
2
Press the + or , key to select [DIAL REGISTER], and then press the
Select key.
3
Press the + or , key to select [SPEED DIAL], and then press the Select
key.