Status, error, and service messages 10-44 – Konica Minolta bizhub C25 User Manual
Page 305
Status, Error, and Service Messages
10-44
NOT REGISTERED
No speed dial desti-
nation or group dial
destination is regis-
tered.
Directly type in the
destination address for
the scan data, or regis-
ter a speed dial desti-
nation or group dial
destination and try
specifying the destina-
tion address again.
OUTPUT TRAY FULL
REMOVE PAPER
The output tray is
full of paper.
Remove all paper from
the output tray.
OVER SEARCH TIME
Communication
with the LDAP
server has timed
out.
Establish a connec-
tion with the LDAP
server again.
PAGE NO. NOT MATCH
(PRESS ANY KEY)
The front and back
sides of the docu-
ment pages for
[2-SIDE%2-SIDE] or
[2-SIDE%1-SIDE]
do not match.
Press any key to can-
cel the job.
PAPER EMPTY
LOAD PAPER (xxx)
The indicated paper
tray has run out of
paper.
Load media into the
indicated tray.
PAPER SIZE ERROR
RESET PAPER (xxx)
Paper of the
selected size is not
loaded in a paper
tray.
Load paper of the
selected size into a
paper tray.
REMOVE ORIGINAL
IN ADF
The document is
loaded in the ADF
while a function is
set that requires
scanning from the
original glass.
Place the document
on the original glass.
RESULTS ARE OVER xxx
The LDAP search
results exceed the
maximum specified
with [MAX.
SEARCH RESULTS]
in the [LDAP SET-
TING] menu.
Change the maximum
setting, or change the
search conditions (for
example, increase the
length of the keyword),
and then try perform-
ing the LDAP search
again.
This message...
means...
Do this...