Selecting a preset zoom ratio, Specifying a custom zoom ratio, Selecting the media tray – Konica Minolta bizhub C25 User Manual
Page 170: Selecting the media tray -5
Making Basic Copies
6-5
Selecting a Preset Zoom Ratio
1
In the main screen (Copy mode), press the + or , key to select the cur-
rent zoom ratio setting, and then press the Select key.
2
Press the + or , key to select [FIXED], and then press the Select key.
3
Press the + or , key to select the desired zoom ratio, and then press the
Select key.
d
The following zoom ratios can be selected.
In metric dimensions:
25%, 50%, 70% (A4%A5), 86% (A4%B5), 100%, 115% (B5%A4),
141% (A5%A4), 200%, 400%
In inch dimensions:
25%, 50%, 64% (LT%ST), 78% (LG%LT), 100%, 129% (ST%LT),
154% (ST%LG), 200%, 400%
The zoom ratio cannot be changed using the keypad.
Specifying a Custom Zoom Ratio
1
In the main screen (Copy mode), press the + or , key to select the cur-
rent zoom ratio setting, and then press the Select key.
2
Press the + or , key to select [MANUAL], and then press the Select key.
3
Use the keypad (10 key) to type in the desired zoom ratio, or press the +
or , key to specify the zoom ratio, and then press the Select key.
d
Each press of the + or , key changes the zoom ratio by 1%.
A setting between 25% and 400% can be specified.
Selecting the Media Tray
d
If the optional Lower Feeder Unit PF-P09 is not installed, the [TRAY3]
does not appear.
1
In the main screen (Copy mode), press the + or , key to select the cur-
rent media tray setting, and then press the Select key.
2
Press the + or , key to select the desired media tray, and then press the
Select key.
d
If no paper is loaded, [EMPTY] appears to the right of the media
type.