Konica Minolta bizhub C25 - Manual (Page 122)

Media 3-9
Glossy Media
Test all glossy media to ensure acceptable performance and to ensure that
the image does not shift.
You can print continuously with glossy media. However, this could affect the
media feed, depending on the media quality and printing environment. If
problems occur, stop the continuous printing and print one sheet at a time.
DO NOT use glossy media that is
- Mixed with any other media in the trays (as this will cause media mis-
feeding)
- Specified for inkjet printers only
Single Side Only
Print on the single side only.
You can print continuously with single side only paper. However, this could
affect the media feed, depending on the media quality and printing environ-
ment. If problems occur, stop the continuous printing and print one sheet at
a time.
Select this setting when paper that should not be used with double sided
copying (for example, when on side has already been printed on) is loaded
as plain paper with a weight of 60 to 90 g/m².
Capacity Tray 1/2 Up to 20 sheets, depending on their thick-
ness
Tray 3 Not supported
Orientation Tray 1 Face down
Tray 2 Face up
Driver
Media Type [Glossy1 (100–128g/m 2 )]
[Glossy2 (129–158g/m 2 )]
Duplexing Not supported
Capacity Tray 1 Up to 100 sheets, depending on the paper
weight.
Tray 2 Up to 250 sheets, depending on the paper
weight.
Tray 3 Up to 500 sheets, depending on the paper
weight.