Kodak HERO 4.2 - Manual (Page 94)

www.kodak.com/go/aiosupport 87
KODAK HERO 4.2 All-in-One Printer
Connecting to a
standard telephone
service If you have a standard telephone service, connect one end of the phone cord that
came with the printer into the LINE IN port on the back of the printer and the other
end into the wall phone jack.
Connecting to a
Digital Subscriber
Line (DSL) If you have a DSL telephone service, connect one end of the phone cord that came
with the printer into the LINE IN port on the back of the printer and the other end
into the DSL filter (available from your DSL provider), which is connected to the wall
phone jack.
NOTE: You must use a DSL filter to transmit fax signals properly to your printer.
DSL filter