Kodak HERO 4.2 - Manual (Page 24)

www.kodak.com/go/aiosupport 17
KODAK HERO 4.2 All-in-One Printer
Connecting with Wi-Fi Direct™
Your HERO 4.2 All-in-One Printer can be set up to host a Wi-Fi Direct network so
you can connect mobile devices and computers* without using a router.
With Wi-Fi Direct, your printer works as an access point so you can:
• print from your mobile device using KODAK Pic Flick App.
• print or scan from your computer with WINDOWS OS or MAC OS (with the
necessary drivers installed).
• access the Online Printer Management Tool.
IMPORTANT: For best results, use your device within 30 m / 100 ft of your printer. Check
that there are no obstructions between your device and printer.
Wi-Fi Direct does not have Internet access. For full printer functionality,
**
connect
your printer to your wireless network (see Connecting to a wireless network,
page 9 ). Your printer can be connected to your wireless network and have Wi-Fi
Direct enabled at the same time.
* You can connect up to four devices.
** An Internet connection is required for these features: Google Cloud Print™, KODAK Email Print
Service, scan to email, and scan to network folder.