Kodak HERO 4.2 User Manual
Page 62
www.kodak.com/go/aiosupport
55
KODAK HERO 4.2 All-in-One Printer
NOTE: You can also adjust the print photo settings using the Online Printer
Management Tool. When viewing the tool in your browser (see
the Online Printer Management Tool, page 22
Settings tab, then
select
Copy & Print > Print Photo.
7. When you have finished changing settings, press
.
IMPORTANT:
To prevent loss of data from your memory card, camera, or portable drive,
do not remove it from the printer while printing.
Print Size
2 x 3
3.5 x 5
4 x 6 (default)
4 x 7
4 x 8
5 x 7
4 x 12
8 x 10
8.5 x 11 or A4
If the selected print size is smaller than the
paper in the paper tray, the printer
automatically arranges the pictures to best
fit the paper size.
Quality
Normal (default)
Good quality output; prints faster than Best.
Best
The highest quality, but the slowest print
speed.
Draft
The fastest print speed, but the lowest
quality.
Scene Balance
On (default)
Off
Adjusts the image brightness to correct for
underexposure and reduces the variation in
contrast in different areas of the picture.
Add Date to Prints
No (default)
Yes
Prints the date the picture was taken or last
edited in a corner of the print.
Transfer to PC
--
Your printer and computer must be
connected with a USB cable. To transfer all
the pictures on the memory card to your
computer, press
.
Save as Defaults
No / Yes
To save the settings as the new default,
touch
Yes.
Print Photos Option
Settings
Description