Kodak HERO 4.2 User Manual
Page 42
www.kodak.com/go/aiosupport
35
KODAK HERO 4.2 All-in-One Printer
5. Enter a Profile Name and Folder Path.
6. If the computer where the folder is located requires authentication to access its
shared folders, type the network login
User Name and Password.
7. If you want to limit who uses your profile to scan documents to your network
folder:
a. Select the
Enable Access PIN
check box.
b. Type a 4-digit numeric
PIN
(your choice). You will need to enter this PIN each
time you access your profile when scanning to a network folder.
8. Click
Test Profile to confirm that the printer can access the network folder.
• If the printer can access the network folder, “Test profile: Successful” appears.
Click
OK
, then click
Save
.
• If the printer cannot access the network folder, “Test Profile: Failed” appears.
Click
OK, then make changes to the network folder profile.
You are now ready to scan a document or photo to your network folder from the
control panel. See