Kodak HERO 4.2 - Manual (Page 20)

www.kodak.com/go/aiosupport 13
KODAK HERO 4.2 All-in-One Printer
Setting up an IP Address
IMPORTANT: You should only need to set up an IP Address for your printer if you are
having a problem connecting your printer to a wireless network. Typically, it
is not necessary to set up an IP Address. This procedure is for advanced
users who know how to obtain the IP Address for the printer.
To set up your IP Address on the printer:
1. Press .
2. Touch , then touch Network Settings .
3. Touch Advanced IP Address Setup .
4. Touch Yes to continue.
5. Touch one of the following:
• Dynamic (DHCP)
• Manual (Static)
6. If you selected Manual (Static) , you are prompted to enter an IP Address, a
Subnet Mask, a Gateway Address, and a DNS Server address. Touch OK after
each entry. Use the LCD keyboard to enter each digit of the numbers.
Consult your Internet Service Provider or network administrator for more
information.