Kodak HERO 4.2 - Manual (Page 25)

Networking Your Printer
18 www.kodak.com/go/aiosupport
Enabling and Using Wi-Fi Direct
1. Press .
2. Touch , then touch Network Settings .
3. Touch , then touch Manage Wi-Fi Direct .
4. Touch Start Wi-Fi Direct Hotspot .
5. Record the Wi-Fi Direct information displayed on the control panel:
Network Name (SSID):____________________________________________
Security String: __________________________________________________
6. Touch OK .
7. Connect your device or computer to the network (SSID), then enter the security
string. Use the information that you recorded in step 5.
8. To print from a mobile device, see Mobile Printing, page 59 .
9. To print or scan from a computer, select your wireless printer (example:
KodakHERO4.2+XXXX).
If you do not see “+xxxx” after your printer name, you must download the
printer drivers; follow the instructions below for your operating system.
On a computer with WINDOWS OS:
a. Select Start > All Programs > Kodak > Kodak Printer Setup Utility .
b. Select No, my printer is not listed , then click Next .
c. From the drop-down list, select your printer, then click Next .
When your printer is detected, driver installation begins.
d. When driver installation is complete, click Done .
On a computer with MAC OS:
a. Select Apple > System Preferences .
b. Under Hardware, select Print & Fax or Print & Scan .
c. Click + in the dialog box.
d. Select your printer from the list.
e. Click Add , if required.
10. For more information on printing, see Printing, page 49 . For more information on
scanning, see Scanning, page 73 .