Kodak HERO 4.2 - Manual (Page 100)

www.kodak.com/go/aiosupport 93
KODAK HERO 4.2 All-in-One Printer
Distinctive Ring Any ring (default) /
Single Ring / Double
Ring / Triple Ring This service, available from most phone
companies, adds multiple phone
numbers to one phone line. Each phone
number then has a distinctive ring
pattern (single, double, or triple ring) to
let you know which number is ringing.
Select the ring pattern assigned to the
phone number for the printer so the
printer can receive faxes automatically.
Fax Speaker On (default) / Off The fax speaker allows you to hear the
dial tone and initial fax tones when
sending faxes.
Print Fax
Confirmation Page After Failure Only
(default) / Never /
Always The Fax Confirmation Page contains the
time and date, the number you called,
the number you called from, and
whether the transmission was
successful.
Print Fax Settings -- To print the current fax settings, load
letter or A4 paper, then press
.
Print Fax Cover Page -- The Fax Cover Page shows the date and
headings for To and From information for
your fax. Use this cover page, if needed,
when sending a fax.
To print a Fax Cover Page, load letter or
A4 paper, then press
.
Print Fax Activity Log -- The Fax Activity Log contains
information (date, time, duration,
to/from, number of pages, and more)
about the last 30 faxes sent and/or
received.
To print a Fax Activity Log, load letter or
A4 paper, then press
.
Dialing Mode Tone (default) / Pulse Determines how the printer dials a fax
number.
Tone dialing (the more common
method) uses tones to dial a phone
number. It is faster and more reliable
than pulse dialing, which uses a series of
pulses to dial a phone number.
Traditionally, pulse dialing was used by
rotary phones; tone dialing is used by
touch-tone phones.
Fax Setting Options Description