Kodak HERO 4.2 - Manual (Page 29)

Online Printer Management Tool
22 www.kodak.com/go/aiosupport
Accessing the Online Printer Management Tool
Access the Online Printer Management Tool in one of the ways described below.
Directly from Home Center Software v7.x or higher:
1. Open Home Center Software.
2. Select Printer Tools on a computer with WINDOWS OS, or Tools on a computer
with MAC OS.
3. Make sure that the name of your wirelessly connected printer appears in the
bottom left of the window.
NOTE: A printer with a wireless connection is listed as the name of the printer plus
a number (for example, KodakHERO4.2+XXXX). If a different printer name
appears, click
Select , then choose your wirelessly connected printer.
4. Under Tools, select Online Printer Management.
The Online Printer Management Tool opens.
From a computer or mobile device:
NOTE: Your computer or mobile device must be connected to the same network as
your printer.
1. Get the IP Address of your wirelessly connected printer:
a. On your printer control panel, press .
b. Touch , then touch Network Settings.
c. Touch View Network Configuration, then touch until you see your printer
IP Address in the format xxx.xxx.xxx.xxx. (See Viewing the network
configuration, page 14 ).
NOTE: If you prefer a printout, touch to select Print Network Configuration,
then touch OK . A Network Configuration Page prints, including the IP
Address in the format xxx.xxx.xxx.xxx.
2. On your computer, open your preferred Internet browser (such as INTERNET
EXPLORER, FIREFOX, SAFARI, CHROME).
3. Type the printer IP Address in the browser address (URL) bar, then press Enter.
The Online Printer Management Tool opens.