Kodak HERO 4.2 User Manual
Page 19
Networking Your Printer
12
www.kodak.com/go/aiosupport
5. Select one of two methods of connecting:
IMPORTANT:
Before you make a selection on the printer, make sure you know where the
router's push button is, or where to enter the generated PIN. If necessary,
consult your Internet Service Provider or router device manufacturer’s
documentation for more information.
6. When the confirmation message appears, touch
OK
.
When the printer is successfully connected, the Wi-Fi connectivity LED stops
blinking and remains lit.
The printer with a wireless connection is listed as the name of the printer plus a
number (for example, KodakHERO4.2+XXXX).
7. If you haven’t installed the KODAK All-in-One Printer Software:
a. Go
.
b. In the results list, click the link for KODAK All-in-One Printer Software for
your computer’s operating system.
c. Follow the on-screen instructions.
Pressing a button
Entering a PIN
NOTE: You will have two minutes to
press or select the WPS button. It
may be a button on the device or
a virtual button in the device’s
software.
a. Touch
Push Button Configuration
.
b.
Press or select the WPS button for
your wireless router.
c.
Touch
OK on the control panel.
a.
Touch
Generate WPS PIN.
b.
In your wireless router’s software,
locate the PIN screen.
c.
Enter the PIN you received on the
LCD into the PIN screen, then
follow the router’s instructions.
d.
Touch
OK on the control panel.