Kodak HERO 4.2 - Manual (Page 101)

Faxing
94 www.kodak.com/go/aiosupport
To adjust fax settings from the Online Printer Management Tool:
1. Open the Online Printer Management Tool (see Accessing the Online Printer
Management Tool, page 22 ).
2. Select the Settings tab, then select Fax > Settings.
3. Change the Sender Information and/or fax Settings as needed.
4. Click Save to update the settings.
Setting the answer mode (auto answer or manual)
The default setting for Auto-Answer is on. When Auto-Answer is on, the printer
picks up all incoming faxes automatically.
To answer calls manually, touch Answer now on the LCD or turn off Auto-Answer
(see also Receiving a fax manually, page 100 ):
1. Press .
2. Touch , then touch Fax .
3. Touch Fax Settings , then touch Fax Auto-Answer .
4. Touch Off to turn Auto-Answer off.
Working with the phonebook
You can enter up to 60 fax numbers in the phonebook.
You can create and manage the phonebook from the printer LCD or, if your printer is
connected to a computer with WINDOWS OS, you can use Home Center Software.
You can also use the Online Printer Management Tool to edit the Fax Phone Book.
See
Using the Online Printer Management Tool to edit the Fax Phonebook, page 96 .
Error Correction On (default) / Off Error correction is applied only when
sending black and white faxes. It reduces
the loss of data, which can occur on poor
quality phone lines.
Error correction increases the send time
on poor quality phone lines, but the
transmission is more reliable. (Error
correction does not apply to faxes being
received.)
If you are using Vonage or Magic Jack,
we recommend that you set Error
Correction to OFF.
Fax Setting Options Description