Rana Systems Elite Series - Manual (Page 52)

ELITE SERIES USER MANUAL DOS ENHANCEMENTS
When finished, FORMAT will display:
DO ANOTHER DISKETTE (Y/N)?
Type (without ):
N
and FORMAT will terminate back to the BASIC
prompt.
You now have a full capacity diskette for your
system drive which will boot correctly, so type:
PR#6
to try it out. A “FILE NOT FOUND” message
should be expected.
There is still one last thing which you need to
do. You need to transfer all the utility pro-
grams supplied on the Enhancer diskette onto
your “full capacity enhanced system master”. If
your system (boot) drive is an Elite Three, then
there is a small preliminary step which you will
need to perform before the utility files can be
transferred. If your system drive isn’t an
Elite Three, then this following procedure which
will use the CLONE utility can be skipped.
If you’re an Elite Three user, you should remove
your enhanced system master from the boot drive
and insert “unconfigured master”.
Type (Elite Three only):
Page 3—27