Rana Systems Elite Series - Manual (Page 222)

ELITE SERIES USER MANUAL ENHANCED DOS UTIL.
the DOS to be modified led is located.
If you type , PROFILE will return you to
BASIC.
PROFILE is very dependent upon how you have your
drives defined under the currently in use DOS.
Whenever you specify to PROFILE that It is to
read a copy of DOS off of a particular diskette,
PROFILE assumes that the DOS will be arranged on
the diskette according to the way the drive is
defined.
This means that an Elite One system diskette
cannot be read by a drive defined under the
currently in use DOS as an Elite Two.
Keeping this in mind, you would answer PROFILE
by typing the number of the slot from which
PROFILE is to read a copy of the enhanced DOS
without following the number with a .
After you’ve told PROFILE the slot number, it
will ask:
ENTER DRIVE NUMBER (1-4)
Just like with the slot number, you would type
the number of the drive from which PROFILE is to
read the copy DOS. If you type , PROFILE
will return to the slot number question.
P a g e 9 — 2 5