Rana Systems Elite Series - Manual (Page 211)

ELITE SERIES USER MANUAL ENHANCED DOS UTIL.
Since CLONE will also copy an entire diskette
(just like COPY and COPYA), the first question
it will as is which type of copy you wish CLONE
to perform (as shown above). The default is
“whole diskette” copy, which means you can
simply press (RETURN> to specify that copy type.
Pressing <0> will also tell CLONE to copy the
entire diskette. Pressing <1> will indicate to
CLONE that you wish only the DOS to be copied.
No matter which type of copy you specify, CLONE
will then ask:
SOURCE:
SLOT NUMBER (1-7)?
where is the slot number from which you ran
CLONE.
A special feature of CLONE is that it allows you
to back—up to previously answered questions so
that you can change you answer. To do this,
simply type in response to any question an
you will be returned to the previous question.
You can then press again to back-up
another question.
With the above question, CLONE is asking for the
slot number of the drive in which you will be
inserting the source (original) diskette. If
is correct, you can simply press .
If is wrong, press the number of the slot
which is correct.
Once the slot number is specified, CLONE will
ask:
P a g e 9 - 1 4