Rana Systems Elite Series - Manual (Page 133)

ELITE SERIES USER MANUAL CP/M ENHANCEMENTS
The enhanced CP/M master is already in the drive
in response to COPY’s request for it, SO just
hit:
CP/M will finally respond with its “A>.
At this point in the procedure you have created
a diskette which will boot correctly (up to a
point) on your higher capacity drive in a higher
capacity way, but the CP/M system which is on
the diskette for that drive still thinks that
your drive is a Disk ][. This is because the
system you copied (the one on the enhanced mas-
ter diskette) was still treating drive A: as a
Disk ][. To remedy this problem, get back into
PROFILE by typing:
PROFILE
Again, the utility will “sign on” with:
Apple ][ CP/M
Drive Configuration Utility
Copyright (c) (p) 1982 RANA Systems
Version 1.1
*
To change the setting for drive A: within that
system sitting on your higher capacity diskette,
type (without ):
B:=A:
P a g e 4 — 6 6