Rana Systems Elite Series - Manual (Page 256)

ELITE SERIES USER MANUAL ENHANCED CP/M UTIL.
The “*” is the standard CP/M utility prompt to
indicate that the utility is waiting for a com—
mand.
The valid command syntax for PROFILE is:
[:=]§:[][,:[]...]!*†
where is the drive containing the copy of
the CP/M to be altered. is the CP/M drive
who’s definition is to be altered within the
copy of the CP/M. is the drive type to
which the drive is to be changed, as given
below. And is the seek speed at which the
drive is to be positioned from track-to-track.
The “*” can replace the entire mess, telling
PROFILE to display the current system configura-
tion without making any changes.
The valid entries are:
0 = Disk II
1 = Elite One
2 = Elite Two
3 = Elite Three
The valid entries are:
S = Slow (all models)
M = Medium (all Elite models)
F = Fast (Elite Two and Three only)
The “:” part is optional. If it is not
specified, then PROFILE will assume the change
is to be made to the currently booted in—memory
P a g e 1 0 - 2 5