Cirrus Logic CDB42448 - Manual (Page 23)

CDB42448
DS648DB2 23
routes the FPGA data to the DSP. Refer to schematic Figure 14 on page 36.
5.6.3 ADC TO AUX SDIN (CS5341->AUX)
Default = 0
0 - Enable
1 - Disable
Function:
This bit toggles a control line for the external data buffer to route the external ADC Data directly to the
AUX_SDIN port. When disabled, the FPGA will route the CS8416 SDOUT to the AUX_SDIN port.
5.6.4 DAC CLOCKS TO DSP (DAC->DSP)
Default = 1
0 - Enable
1 - Disable
Function:
This bit toggles a control line for the external clock buffer to route the DAC sub clocks directly to the
DSP port (see Figure 7 on page 14).
5.6.5 ADC CLOCKS TO DSP (ADC->DSP)
Default = 1
0 - Enable
1 - Disable
Function:
This bit toggles a control line for the external clock buffer to route the ADC sub clocks directly to the
DSP port (see Figure 7 on page 14).
5.6.6 DSP CLOCKS TO DAC (DSP->DAC)
Default = 1
0 - Enable
1 - Disable
Function:
This bit toggles a control line for the external clock buffer to route the DSP clocks directly to the DAC
serial port (see Figure 7 on page 14).
5.6.7 DSP CLOCKS TO ADC (DSP->ADC)
Default = 1
0 - Enable
1 - Disable
Function: