Cirrus Logic CS4207 - Manual (Page 84)

84 DS880F4
CS4207
Bits [31:0] are sticky and will not be reset by a Link Reset or a CODEC Reset:
Bits Type Default Description
31:30 Read/Write 00b
Port Connectivity (PCON): The port complex is
connected to a jack.
29:24 Read/Write 000010b
Location (LOC): This field indicates the physical
location of the jack or device to which the pin
complex is connected. Set to External | Front.
23:20 Read/Write 2h
Default Device (DD): Indicates the intended use
of the connection is for Headphone.
19:16 Read/Write 1h
Connection Type (CTYP): Indicates the type of
physical connection is 1/8” jack.
15:12 Read/Write 4h
Color (COL): This field indicates the color of the
physical jack for use by software. The color
selected is Green.
11:8 Read/Write 0h
Miscellaneous (MISC): No PDC override.
7:4 Read/Write Fh
Default Association (DA): This field is used by
software to group Pin Complex (and therefore
jacks) together into functional blocks to support
multichannel operation. All jacks with the same
association number may be assumed to be
grouped together. A value of all ‘0’s is reserved.
A value of all ‘1’s in this field indicates that the
Association has the lowest priority.
3:0 Read/Write 0h
Sequence (SEQ): This field indicates the order
of the jacks in the association group.